Why did the Tacoma Narrows Bridge collapse?
The Tacoma Narrows Bridge collapsed on November 7, 1940, after wind-driven motion developed into large twisting oscillations. Airflow around the flexible bridge supplied energy to its motion, allowing the twisting to grow. The modern explanation is torsional flutter, which differs from a wind gust simply matching the bridge’s natural frequency. Investigating board, pp. 127–133; Billah and Scanlan, pp. 118, 122–123.
A bridge can be strong enough to carry ordinary static loads and still be unstable in moving air. Its response also depends on how the load changes as the structure moves.
Watch the explanation
Watch the episode to follow the bridge’s transition from vertical motion to destructive twisting.
Why flexibility mattered
Tacoma’s roadway was slender and unusually flexible. Its plate-girder sides and deck formed an aerodynamic shape that moved through the surrounding airflow as the span bent or twisted. The 1941 investigating board described a structure with ample strength against static forces but insufficient rigidity and damping to keep its wind-driven movements within safe limits. Investigating board, summary and pp. 127–130.
Damping removes energy from motion. Friction and other losses can make an oscillation fade. A lightly damped structure loses little energy each cycle, so energy supplied by the wind can sustain or increase its movement.
Flexibility alone does not mean a suspension bridge is unsafe. The relevant question is how flexibility, damping, deck shape and the forces from the air work together.
Flutter is a feedback problem
As the deck twists, it changes the angle at which the wind meets it. The aerodynamic forces change in response. Under unstable conditions, the resulting twisting moment does positive work on the bridge over a cycle: the airflow adds more energy than the structure dissipates. The oscillation can then grow. Billah and Scanlan, pp. 122–123.
Engineers call this negative aerodynamic damping. Moving air supplies the energy, and the bridge’s motion helps determine how it receives that energy.
The familiar playground-swing analogy explains a different situation: an external force applied at the right frequency. Tacoma’s torsional instability involved forces coupled to the bridge’s own motion. Billah and Scanlan specifically challenged textbook accounts that treated the collapse as simple forced resonance from periodic vortex shedding. Billah and Scanlan, p. 118.
What the investigation could establish
The investigating board examined the transition to twisting motion and the slipping of a cable band. It discussed alternative sequences rather than establishing that a single slipped component independently caused the disaster. The broader vulnerability was the bridge’s response to wind. Investigating board, pp. 130–133.
Replacing one suspected trigger would not, by itself, establish that the bridge was aerodynamically stable.
After the failure, aerodynamic stability became a central concern in suspension-bridge design. Washington State’s history describes the later use of a deeper, open stiffening truss and more wind-tunnel studies to test how the structure, its motion and the airflow interact. WSDOT bridge history.
The source record
Ammann, von Kármán and Woodruff: The Failure of the Tacoma Narrows Bridge
1941 investigating board report · Summary and conclusions, pp. 127–133 (PDF pp. 134–140).
Billah and Scanlan: Resonance, Tacoma Narrows bridge failure, and undergraduate physics textbooks
American Journal of Physics 59, 118–124 (1991) · Especially pp. 118 and 122–123, inspected as page images.
Washington State Department of Transportation: Why Did Galloping Gertie Collapse?
Official bridge history · Aerodynamic instability and the legacy of wind-tunnel testing.
Research checked September 21, 2026. Illustrative episode images are not primary evidence.
